Goss Presses, Canon WiFi, and 3D Filament: FAQs from a Print Shop Purchaser
-
What I actually manage at a print shop—and the questions I keep getting
-
Q1: Is the Goss Community printing press still worth keeping?
-
Q2: How do I buy Goss press parts without getting overcharged?
-
Q3: Is there a reliable 3D printer filament chart out there?
-
Q4: What's the fastest way to do a Canon printer WiFi setup?
-
Q5: How do I change WiFi on an HP printer?
-
Q6: What's the biggest lesson from managing all these different purchases?
What I actually manage at a print shop—and the questions I keep getting
I'm the office administrator for a 45-person newspaper printing company. Our main press is a Goss Community. We print roughly 20,000 copies a day. The office runs four Canon printers, two HP LaserJets, and one Creality Ender 3 for printing jigs and prototype parts.
I process about 75 purchase orders a year across 12 vendors, with a budget around $140,000. I report to both operations and finance. Here are the questions I've answered most often over the past two years.
Q1: Is the Goss Community printing press still worth keeping?
Depends on what you print.
We run a weekly paper at 18,000 copies, 8 pages. Electricity plus maintenance parts comes to just over $20,000 a year. If we outsourced that volume to a commercial printer, the quote we got in 2022 was around $45,000. It's probably higher now.
But I don't have hard data on total cost of ownership over three or five years. I only have our own maintenance records. Different print volume, shifts, and specs—your math will be different.
What worries me more than cost is parts availability. The Community series is relatively well-supplied, but certain VFDs and control boards have to come from the refurb market. A shop I know runs an older Metro—they spent four months looking for a motherboard last year. That was four months of near-shutdown.
So my experience says: as long as you can get parts, maintaining beats replacing. If you can't stomach part-chasing, plan your exit early.
Q2: How do I buy Goss press parts without getting overcharged?
I learned this one the hard way—$400 hard.
When I first took over purchasing, I found a new vendor selling Goss press parts. Their quote was 15% cheaper than our regular supplier. I thought, "What are the odds?" and placed the order.
The invoice showed the part price only. Handwritten additions: $80 "expediting fee" and $65 shipping. Finance rejected my expense report. I ate the $400 out of the department budget.
The rule now: quotes must be landed cost. Parts, tax, freight, any possible handling fee—all on one quote. No handwritten additions.
My experience is limited to about 25-30 part orders a year, and only Community and Metro models. If you run a Universal or Colorliner, your parts situation is different.
Q3: Is there a reliable 3D printer filament chart out there?
I've looked at several online filament charts. Most are made by filament sellers who rank their own brand first. After reading three of them, I stopped trusting all of them.
Our use case is simple: one Ender 3, 2-3 spools a month, printing jigs and prototypes. When I started, I bought one roll of PLA and one of PETG. PLA works fine for indoor jigs. PETG holds up better under load for anything structural.
I wish I had tracked our filament usage more carefully from the start. All I have is a rough sense of consumption—no hard data on yield per spool or failure rate. If you're running high-volume, tight-tolerance prints, my experience won't translate.
Q4: What's the fastest way to do a Canon printer WiFi setup?
We have four Canon MAXIFY units across two floors. The WiFi setup flow is basically the same on all of them:
- Press "Menu" on the printer panel
- Find "LAN settings"
- Select "Wireless LAN setup"
- Choose "Access point search"—or enter the SSID manually
- Enter the WiFi password
- Confirm
If the printer screen is slow, Canon's PRINT app works. I usually just use the panel—takes five minutes, no phone needed.
One tip: do the setup near the router. Two floors away, I've watched printers fail to find the network more than once.
Q5: How do I change WiFi on an HP printer?
We have two HP LaserJet M404 units. The flow differs slightly from Canon:
- Press the "Setup" button (gear icon)
- Select "Network"
- Select "Wireless Menu"
- Select "Wireless Setup Wizard"
- Pick your network and enter the password
One thing I learned the hard way: if the router hands out a new IP, every computer needs the driver reinstalled. I now pin both HP printers to static IPs in the router. That saved our team a ton of repeat setup time.
No real cost here, just headaches. Wish I'd done it from day one.
Q6: What's the biggest lesson from managing all these different purchases?
Transparency beats cheap.
Early on, I always hunted for the lowest quote. What I got instead: invoice problems, missed delivery windows, and vendors who went silent when something went wrong. Now I check two things: Is the quote all-inclusive? Is the invoice clean?
Quote higher if you need to—just show me the real number. The vendor who lists every fee upfront, even 10% above the lowest quote, usually costs less in the end. Because I'm not burning time chasing invoices, explaining charges, or fighting with finance.
The FTC's advertising guidelines require claims to be truthful and not misleading. I just want supplier quotes to meet the same standard.
Reading isn't the same as a sample print.
Send us your substrate — we'll run a sample and mail it back through your nearest authorized Mutoh dealer.
Request a Sample Print